E-Flite UMX Extra 300 3D - Bind N Fly

Zoom

Our Price:   £79.99 List Price:   £99.99 Saving Of:   £20.00 (20%) (Inc. 20% VAT) Part Number:  EFLU1080 Brand:  E-Flite Availability:      In stock, immediate despatch

The Ultra Micro eXtreme (UMX) Extra 300 3D makes the dream of a 3D plane you can fly almost anywhere a reality. With a flying weight of barely over an ounce (just 33 grams), battery and all, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room. Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, makes it all possible.

The structure uses a fraction of the foam material usually used in profile planes of this type and is covered with micro-thin film. The airframe is reinforced with carbon fiber rods that keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision. Optional Side Force Generators are also included. These razor-thin pieces of foam slide onto the leading edge of the wing and enhance rudder authority in knife-edge flight. They improve tracking during precision aerobatics too.

The UMX™ Extra 300 3D BNF comes completely assembled with a punchy 8.5mm coreless brushed motor and Spektrum™ AR6400L Ultra Micro DSM2 Receiver/ESC installed. Built-in long-throw servos on the AR6400L drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 1S 3.7V 150mAh Li-Po battery and DC Li-Po charger are also included. For best performance, a DSM2 aircraft transmitter with dual rates and expo is recommended.


Specifications

Wingspan: 16.8 in (427mm)

Overall Length: 19.4 in (494mm)

Wing Area: 74 sq in (4.8 sq dm)

Flying Weight: 1.2 oz (32.5g)

Motor Size: 8.5mm Coreless Brushed

Trim Scheme Colors: Red, Grey, Clear, Black

Prop Size: 130mm x 70mm

Recommended Battery: 3.7V 1-Cell 150mAh LiPo (included)

Approx. Flying Duration: 4-8 minutes

Scale: Ultra Micro

Minimum Age Recommendation: 14 years

Experience Level: Advanced

Recommended Environment: Indoor

Assembly Time: Less than 1 Hour

Is Assembly Required: No


Needed to Complete

A 4+ Channel DSM2 compatible Transmitter. A programmable transmitter capable of dual rates and exponential is highly recommended.